Email Notification on D-Link DRP-1061 Printer Server

If you need to notify when printer status change by email you can set this using web configuration.

On Web Configuratin page go to ADVANCED -> E-Mail Notification

Enable E-mail Notification
You can set the print server to send an alert message when the printer status changes through E-mail. To enable this function, set the Enable e-mail notification option to Yes. Then, input the administrator's E-mail address in the Destination e-mail Address field.

E-mail Account Details
You can assign an E-mail address to the print server, so that your mail of the account can be printed out directly through the printer (ASCII text only). To enable this function, enter the E-mail account in the Print Server E-mail Address field. Then enter the server address, used to receive your E-mail here, in the Incoming E-mail (POP3) Server Address field. For outgoing E-mail (SMTP) Server Address field, enter the server address that is used to send your E-mail here. If your mail server needs to verify the user when sending E-mail, Print Server will apply the E-mail Account (POP3) Name and E-mail Account (POP3) Password to
the mail server.

E-mail Printing
This section is for you to do E-mail Printing configuration, including:
E-mail Printing (ASCII Text Only): Allows you to enable or disable the E-mail printing. Check E-mail Interval: Allow you to set up a time interval in minute in order to check/receive E-mail periodically. After done the configuration, click Apply Settings to restore the new configuration, or Cancel to abandon.

Related post