Search This Blog

07 May 2010

Over-Temperature Protection NP600 Portable Projector

If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the lamp with the STATUS indicator blinking (2-cycle On and Off.)

Should this happen, do the following:
  • Unplug the power cable after the cooling fans stop.
  • Move the projector to a cooler location if the room where you are presenting is par ticularly too war m.
  • Clean the ventilation holes if they are clogged with dust.
  • Wait about 60 minutes until the inside of the projector becomes cool enough.